13
Illumisphere 50
Product code: 41123
Use a suitable suspension chain or cable to hang the device. Make sure that the suspension cable/chain
can hold 10 times the weight of the Illumisphere 50. Fasten the suspension chain/cable onto the cable
suspension eyelet (08), see Fig. 05.
Attention
Do not use the power cable or the DMX cables to hang the LED sphere.
Fig. 05
Connecting to Power Supply
DANGER
Electric shock caused by short-circuit
The device accepts AC mains power at 100–240 V and 50/60 Hz. Do not supply power at any other
voltage or frequency to the device.
This device falls under IEC protection class I. Make sure that the device is always electrically connected
to the ground (earth).
Before connecting the device to the socket-outlet:
●
Make sure that the power supply matches the input voltage specified on the information label on
the device.
●
Make sure that the socket-outlet has ground (earth) connection.
Connect the device to the socket-outlet with the power plug. Do not connect the device to a dimmer
circuit, as this may damage the device.
