8
Ordercode: 40314
Aircone Q6 WDMX
Installation
Remove all packing materials from the Aircone Q6 WDMX. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.
Cone Installation
Fig. 02
Attach the Velcro strip on the cone to the Velcro strip on the edge of the Aircone.
