16
Ordercode: 40314
Aircone Q6 WDMX
3. Manual (Static Colors)
01)
While in main menu, press the MODE button until the display shows
.
02)
Press the SETUP button to enter.
03)
Repeatedly press the SETUP button to toggle through the following static colors RED, GREEN, BLUE,
WHITE, AMBER, UV.
04)
Press the UP/DOWN buttons to set the LED brightness.
Red
0-255
Green
0-255
Blue
0-255
White
0-255
Amber
0-255
UV
0-255
05)
The adjustment range for each color is between 0-255.
06)
Use the Up / Down buttons to change the strobe speed from
.
07)
You can combine RED, GREEN, BLUE, WHITE, AMBER and UV to create an infinite range of colors (0-
255).
4. Sound-controlled
01)
While in main menu, press the MODE button until the display shows
.
02)
Press the SETUP button to enter.
03)
Press the UP/DOWN buttons to set the sound sensitivity. The adjustment range is between
, from OFF to high sound sensitivity.
5. DMX-512
01)
While in main menu, press the MODE button until the display shows
.
02)
Press the SETUP button to enter.
03)
Press the UP/DOWN buttons to choose the desired DMX address.
The adjustment range is between
.
6. Master/Slave
01)
While in main menu, press the MODE button until the display shows
.
02)
The device is now operating in Slave mode and will react the same as its master device.
7. Settings
01)
While in main menu, press the MODE buttons until the display shows
.
02)
Press the SETUP button to enter.
03)
Repeatedly press the UP/DOWN buttons to toggle through the following submenus:
Dimming curves
Fan speed
DMX failure
Reset settings
04)
Press the SETUP button to open the desired menu.
