9
Ordercode: 40314
Aircone Q6 WDMX
Wireless DMX Control
Transmitter/Receiver Mode Selection
01)
Press the Function button (07) once. The display will show the currently selected wireless DMX
operation mode:
Transmitter mode
Receiver mode
02)
Press and hold down the Function button (07) for 5 seconds in order to switch between the 2
operation modes (Transmitter mode and Receiver mode).
03)
The display will count up from 0 to 5, to indicate how long the Function button (07) remains pressed.
04)
When the display shows “5,” release the Function button (07). The operation mode has been
changed.
05)
Press the Function button (07) once, to see the currently selected operation mode.
06)
Repeat steps 2-5 to switch to the other operation mode.
Transmitter Mode
In this mode, the Aircone sends DMX signals to the paired receivers.
01)
Press and hold down the Function button (07), until the display shows
. The Aircone will now
attempt to connect to the available wireless DMX receivers. The LED indicator (09) will be blinking
fast. Once the connection has been established, the LED indicator (09) remains on.
02)
Press one of the control buttons (06) to enter main menu and choose the desired operation mode.
This step is necessary for the Aircone to send a DMX signal to wireless DMX receivers. When a DMX
signal is being sent, the LED indicator (09) will be blinking slowly.
03)
Press and hold down the Function button (07), until the display shows
. The Aircone will now
terminate the connection with all paired wireless DMX receivers.
Receiver Mode
In this mode, the Aircone receives DMX signals sent by a transmitter.
01)
When the Aircone does not receive any signal, the LED indicator (09) is off.
02)
Try to pair your transmitter with the Aircone. The LED indicator (09) will be blinking fast. Once the
connection has been established, the LED indicator (09) will be blinking slowly.
03)
When the Aircone receives a signal from the transmitter, the LED indicator (09) is on.
04)
Press and hold down the Function button (07), until the display shows
. The Aircone will now
terminate the connection with the transmitter.
