16
Order code: 34011
ACT Fresnel 50 WW
Start-up
Upon start-up the display will show a splash screen with the name of the device:
Immediately afterwards, the display will show the start screen. The start screen provides information about
the current control mode of the device and the temperature of the LEDs.
Manual mode via the manual
dimmer control
Manual mode via the menu
DMX mode
●
Use the MENU button to exit the current submenu, to return to the Main Menu or to return to the start
screen.
●
Use the UP/DOWN buttons to navigate through the menus or to increase/decrease numeric values.
●
Use the ENTER button to open the desired menu, to confirm your choice or to set the currently
selected value.
Note:
If no button is pressed, after 30 seconds of inactivity the display will turn off. Press any button to turn the
display on. Refer to 4. Display Settings on page 19 for more information.
Main Menu Options
The main menu has the following options:
01)
Press the UP/DOWN buttons to navigate through the Main Menu.
02)
Press the ENTER button to open the menus.
1. DMX Functions
In this menu you can configure the DMX settings of the device.
01)
Press the UP/DOWN buttons to scroll through the following options:
02)
Press the ENTER button to confirm your choice.
