18
Order code: 34011
ACT Fresnel 50 WW
2. Manual Settings
In this menu you can select how the device will be operated manually.
01)
Press the ENTER button to open the pop-up submenu for the manual mode settings.
02)
Press the UP/DOWN buttons to select one of the following 2 options:
●
Rotary Knob:
The dimming of the light output is controlled manually with the manual
dimmer control (15). Refer to One ACT Fresnel (Manual Control) on page 11
for more information
●
Manually Defined: The dimming of the light output is controlled manually via the menu. Refer
to One ACT Fresnel (Manual Control) on page 11 for more information
03)
Press the ENTER button to confirm your choice.
3. Fixture Settings
In this menu you can adjust the fixture settings.
01)
Press the UP/DOWN buttons to toggle between Dimmer Curve and Dimmer Speed.
●
Dimmer Curve:
There are 4 options available: Linear, Square Law, Inverse Square Law and
S-Curve
●
Dimmer Speed:
There are 2 options available: LED (instant dimming without delay) and
Halogen (delayed dimming, imitating the behavior of a halogen lamp)
02)
Press the ENTER button to confirm your choice.
