19
Order code: 34011
ACT Fresnel 50 WW
4. Display Settings
In this menu you can adjust the display settings of the device.
01)
Press the UP/DOWN buttons to scroll through the following options:
02)
Press the ENTER button to confirm the selection and open the pop-up submenu where you can
adjust the settings.
03)
Press the UP/DOWN buttons to select the desired setting.
04)
Press the ENTER button to confirm the selection.
The available options are:
●
Display Inverse:
The OLED display will be rotated at 180° (NO/YES)
●
Backlight Auto Off: The backlight of the OLED display will not turn off automatically after 30
seconds of inactivity (NO/YES)
●
Display Contrast:
The adjustment range is between 0 and 30 (from low to high contrast)
5. Fixture Test
In this menu you can perform test of the device’s parameters and adjust manually the dimmer and
strobe values.
01)
Press the UP/DOWN buttons to select one of the following 2 options:
●
Auto Test:
The device performs an auto test of its parameters.
●
Manually Defined: See 5.1 Manually Defined for more information
02)
Press the ENTER button to confirm your choice.
5.1 Manually Defined
In this submenu you can manually adjust the dimmer and strobe values.
01)
Press the UP/DOWN buttons to toggle between Dimmer and Strobe:
02)
Press the ENTER button to confirm your selection and open the respective pop-up submenu where
you can adjust the values.
03)
Press the UP/DOWN buttons to adjust the values. The adjustment range is between 0 and 255.
04)
Press the ENTER button to confirm your choice.
