background image

 

 

 

20 

 

  

 

 

Galactic TXT 

Product code: 51342 

6.

 

Operation 

The device can be operated with a DMX controller or manually.  

Manual operation can be done using: 

 

the control panel 

 

the keyboard, or 

 

the remote control. 

 

Safety Instructions for Operation 

 

WARNING 
Laser radiation 
Avoid exposure to beam. 

This device is a class 3B laser device according to the classification in NEN-EN-IEC 60825-1:2014. The 
device can be operated only by instructed or skilled persons.  

 

Check all applicable national and international regulations concerning laser safety before operating 
this device.  

 

Attention 
This device must be used only for the purposes it is designed for. 
 

This device is intended for professional use as a laser projector to produce laser displays or show effects. It 
is suitable only for indoor installation. This device is not suitable for households. 

Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use. 

 

Attention 
Power supply 

Before connecting the device to the power supply, make sure that the current, voltage and frequency 
match the input voltage, current and frequency specified on the information label on the device. 

 

Control Modes 

The Galactic TXT supports the following control modes: 

 

Stand-alone: 

 Auto mode (built-in shows), text mode, time mode, countdown mode, 
sound-controlled mode (built-in shows) 

 

Master/Slave: 

Auto mode (built-in shows), text mode, time mode, countdown mode, 
sound-controlled mode (built-in shows) 

 

DMX-512:   

 

20 channels 

 

 

Summary of Contents for 51342

















































Reviews: