7
Galactic TXT
Product code: 51342
WARNING
Laser radiation
Avoid exposure to beam.
This device is a class 3B laser device according to the classification in NEN-EN-IEC 60825-1:2014. It emits
visible radiation in the wavelength range 400–700 nm. Exposure to the direct or reflected laser beam,
including accidental short term exposure, is hazardous to the eye. Focused laser beam can cause minor
skin injuries.
Check all applicable national and international regulations concerning laser safety before using this
device. The user is responsible for the safety of all persons present during the use of the laser device.
●
Do not look into the laser beam.
●
Do not expose users of telescopic optics, such as binoculars, to this device.
●
Do not open the device and do not modify the device.
●
Do not use the device if the housing or the optics are damaged.
●
Do not point the laser beam at people or animals.
●
Make sure that the beam is terminated on a non-reflective and non-combustible surface.
●
Do not point the laser beam at reflective surfaces such as windows, mirrors and shiny metal.
●
Do not operate the device without supervision.
Attention
Risk of fire
If the beam is continuously pointed at one place from a close distance, the laser beam can burn
materials.
●
Do not point the laser beam at materials susceptible to burning.
Attention
Power supply
●
Before connecting the device to the power supply, make sure that the current, voltage and
frequency match the input voltage, current and frequency specified on the information label on the
device.
●
Make sure that the cross-sectional area of the extension cords and power cables is sufficient for the
required power consumption of the device.
Attention
General safety
●
Do not insert objects into the air vents.
●
Do not connect the device to a dimmer pack.
●
Do not switch the device on and off in short intervals. This decreases the device’s life.
●
Do not shake the device. Avoid brute force when installing or operating the device.
●
If the device is dropped or struck, disconnect the device from the electrical power supply
immediately.
●
If the device is exposed to extreme temperature variations (e.g. after transportation), do not switch it
on immediately. Let the device reach room temperature before switching it on, otherwise it may be
damaged by the formed condensation.
