SHOWTEC 50405, Manual

Page: 4 / 32

3
Ordercode: 50405
RDM Commander
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
 Showtec RDM Commander
 1 x flight case
 9V DC, 500mA power a plug adapters
 User manual
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
 be qualified
 follow the instructions of this manual
Before the initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes contained in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
 Never remove warning or informative labels from the unit.
 Do not open the device and do not modify the device.
 Do not disconnect and reconnect the device in short intervals, as this would reduce the device’s life.
 Only use the device indoors, avoid contact with water or other liquids.
 Avoid flames and do not put close to flammable liquids or gases.
 Always remove the batteries, when the device is not used or before cleaning!
 Make sure that the device is not exposed to extreme heat, moisture or dust.