10
Ordercode: 50405
RDM Commander
2. DMX Data--RX
With this menu, you can monitor the value of input signal, depending on the chosen display mode (see
page 21).
01)
Select
DMX Data--RX
and open the menu.
02)
The display will show:
03)
In
Normal
display mode, the channel values on the display will change accordingly to the changes
made with another DMX controller.
04)
In
Hold
display mode, the channel values on the display will not change, regardless of the changes
made with another DMX controller.
2.1. Barchart Display
01)
Select
Barchart display
and open the menu.
02)
If there is no signal input, the display will show:
03)
Each line indicates 10 channels, in total. Turn the jog wheel to select
>
and press the jog wheel to
proceed.
04)
If there is signal input, the display will show the values of the received signals in the form of a bar
chart:
05)
If you select the question tag and open help menu, the display will show the information about
different fader values:
Summary of Contents for 50405
Page 29: ...28 Ordercode 50405 RDM Commander...
Page 30: ...29 Ordercode 50405 RDM Commander Notes...
Page 31: ...30 Ordercode 50405 RDM Commander...
Page 32: ...2015 Showtec...
