17
Ordercode: 50405
RDM Commander
11)
Now you have 2 options to choose from:
UID
: Select the device which you want to set a command for.
DMX_START ADDRESS
: Set the value for each parameter (28 in total).
12)
Select the desired menu and press the jog wheel to open.
Notes:
01)
In
Command: Get
, if you have chosen
UID
, the number of IDs is limited to 45.
02)
In
Command: Set
, if you have chosen
UID
, the number of IDs is limited to 28.
03)
You can carry out GET “DMX_PERSONALITY_DESCRIPTION,” GET “SENSOR_DEFINITION” and GET
“SENSOR_VALUE” only if perform GET “STATUS_MESSAGES” first.
04)
You can GET or SET the relevant parameter ID only if you perform GET “PARAMETER_DESCRIPTION”
first.
05)
You can carry out GET “STATUS-ID_MESSAGES” only if you perform GET “”STATUS_MESSAGES” first.
5. DMX1000K--RX
01)
Select
DMX1000K--RX
and open the menu.
02)
The display will show:
03)
This mode can be used in the way similar to
DMX Data--RX
mode. See page 10.
6. DMX1000K--TX
01)
Select
DMX1000K--TX
and open the menu.
02)
The display will show:
03)
This mode can be used in the way similar to
DMX Data--TX
mode. See page 12.
Summary of Contents for 50405
Page 29: ...28 Ordercode 50405 RDM Commander...
Page 30: ...29 Ordercode 50405 RDM Commander Notes...
Page 31: ...30 Ordercode 50405 RDM Commander...
Page 32: ...2015 Showtec...
