20
Ordercode: 50405
RDM Commander
9. Cable Test
With this menu you can check whether the cabling is damaged.
01)
Select
Cable Test
and open the menu. The display will show:
02)
Connect a DMX cable to the DMX IN and OUT signal connectors on the device
(06/07/08/09 on p.6)
.
03)
Select
Press OK
and press the jog wheel to start the test.
04)
If the cable
is damaged
, the display will show:
05)
If the cable
is OK
, the display will show:
10. MIDI Data--RX
With this menu you can receive MIDI signals and view them on the display.
01)
Select
MIDI data--RX
and open the menu. The display will show:
02)
The speed of data change depends on the number of received MIDI signals. The larger the number,
the faster the change speed.
03)
If there is no MIDI signal input, data will not change.
Summary of Contents for 50405
Page 29: ...28 Ordercode 50405 RDM Commander...
Page 30: ...29 Ordercode 50405 RDM Commander Notes...
Page 31: ...30 Ordercode 50405 RDM Commander...
Page 32: ...2015 Showtec...
