19
Ordercode: 50405
RDM Commander
8. Cues Save/Run
With this menu, you can save and run cues. If
there is DMX signal input
, the device will save it as a cue. If
there is no DMX signal input
, the previously saved cues will be overwritten with a new one. You can save
up to 99 cues.
8.1. Save Cue
01)
Select
Cues Save/Run
and open the menu. The display will show:
02)
Select
Save Cue(Scene)
and press the jog wheel to save a cue. The display will show :
03)
Select
As Cue No.:
and press the jog wheel. Then turn the jog wheel to assign the cue number which
you are about to save.
04)
Select
Save
and press the jog wheel to confirm.
8.2. Run Cue
01)
Select
Run Cue(Scene)
and open the menu. The display will show:
02)
Now you have the following options to choose from:
Start:
and
End:
Set the desired cue, between 1-99.
Run speed:
Set the cue running speed, between 1-10.
Fade Time:
Set the fade time between cues, between 0-100%.
03)
Select the desired menu and press the jog wheel to open.
04)
If you set
Run speed
to 0, you can set the speed manually. The display will show:
05)
Select
Go
and press the jog wheel. Each press of
Go
will cause the cues to switch.
Summary of Contents for 50405
Page 29: ...28 Ordercode 50405 RDM Commander...
Page 30: ...29 Ordercode 50405 RDM Commander Notes...
Page 31: ...30 Ordercode 50405 RDM Commander...
Page 32: ...2015 Showtec...
