30
Spectral M800 Q4 IP
Product code: 43571
Built-in and Custom Programs
In this menu you can set the built-in programs or choose your edited custom programs.
01)
Press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to open the menu.
03)
Press the UP/DOWN buttons to choose one of the 10 uneditable built-in programs (AT.01–10) and 10
editable presets (PR.01–10) which can be edited in Edit mode. See 6.6.6. Edit Mode on page 31 for
more information.
04)
Press the ENTER button to activate the program.
Master/Slave Mode
In this menu you can set the device as a slave.
01)
Press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to open the menu.
03)
Press the UP/DOWN buttons to toggle between the following 2 options:
DMX/Master Mode
Slave Mode. The device will react the same as the master device.
DMX Address
In this menu you can set the DMX starting address.
01)
Press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to open the menu.
03)
Press the UP/DOWN buttons to choose the desired DMX address. There are 512 available DMX
addresses to choose from
.
DMX Configuration
In this menu you can set the desired DMX channel mode (personality).
01)
Press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to open the menu.
03)
Press the UP/DOWN buttons to choose between RGB or RGBW.
04)
Press the ENTER button to open the selected submenu.
05)
Press the UP/DOWN buttons to toggle through the following DMX channel modes:
RGB Mode:
TOUR
9 channels
TR16
13 channels
AR1.D
4 channels
RGBW Mode: 8BIT
10 channels
16BI
15 channels
SSP
7 channels
ARC.2
4 channels
AR2.D
5 channels
AR2.S
6 channels
