35
Spectral M800 Q4 IP
Product code: 43571
RGB Calibration
In this menu you can adjust the temperature of the white color.
01)
If the display shows
, press the ENTER button to open the menu. The display shows
.
02)
Press the ENTER button to open the submenu.
03)
Press the ENTER button to toggle through RED, GREEN and BLUE.
04)
Press the UP/DOWN buttons to set the color intensity. The adjustment range is 0–255, OFF to FULL ON.
Calibration Reset
In this menu you can reset the calibration settings.
01)
If the display shows
, press the ENTER button to open the menu.
02)
Press the ENTER button to open the menu.
03)
Insert the password: UP>DOWN>UP>DOWN and press the ENTER button to confirm.
04)
The display will show
and the calibration settings will have been reset.
Safety Lock
In this menu you can set the display lock if no button is pressed within 25 seconds.
01)
Press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to open the menu.
03)
Press the UP/DOWN buttons to choose between ON and OFF.
04)
If you have selected ON, press the ENTER button to confirm.
Note:
The display turns off if no button is pressed within 25 seconds. To access the main menu, you will need to
enter the password. The default password is pressing the UP/DOWN buttons in the following order: UP,
DOWN, UP, DOWN, ENTER.
Information
In this menu you can view the currently installed software version.
01)
Press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to open the menu and view the currently installed software version. The
currently installed software version is
.
