10
Ordercode: 42578
Powerspot 10 SW White
Multiple Powerspots 10 SW (DMX Control)
01)
Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02)
Always use a safety cable (ordercode 70140 / 70141).
03)
Use a 3-pin XLR cable to connect the Powerspots and other devices.
04)
Link the units as shown in Fig. 04. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX-signal cable. Repeat this process to link the second, third, and fourth units.
05)
Supply electric power: Plug electric mains power cords into each unit's Pro Powercon socket, then
plug the other end of the mains power cord into proper electric power supply sockets, starting with
the first unit. Do not supply power before the whole system is set up and connected properly.
Multiple Powerspots 10 SW DMX Set Up
Fig. 04
Note : Link all cables before connecting electric power
