15
Ordercode: 42578
Powerspot 10 SW White
08)
Use the
UP/DOWN
buttons to change the values.
Speed from 00-100
Flash Frequency from 00-99
Static Color control
With this menu you can manually set a desired color.
01)
Press the
MODE
until the display shows
.
02)
Press the
SETUP
button to open this menu.
03)
You can use the
SETUP
button to scroll through 3 color options and also set the strobe frequency.
04)
Use the
UP/DOWN
buttons to change the values.
Gradual adjustment Amber (0-255)
Gradual adjustment Warm white (0-255)
Gradual adjustment Cool white (0-255)
Frequency strobe (0-99)
You can combine Amber, Warm white and Cool white to create an infinite range of white colors.
Sound control mode
With this menu you can set the sensitivity of the sound mode.
01)
Press the
MODE
button until the display shows
.
02)
Press the
SETUP
button to open this menu.
03)
Use the
UP/DOWN
buttons to change the values.
Set the sensitivity of the sound control mode between
.
04)
Turn on the music and the Powerspot 10 SW will react to the beat of the music
DMX Addressing/ DMX configuration
With this menu you can set the DMX address and choose a DMX configuration.
01)
Press the
MODE
button until the display shows
.
02)
Press the
SETUP
button to open this menu. You can choose 512 different DMX addresses.
03)
Use the
UP/DOWN
buttons to select the required address from
.
Once you have set the desired DMX address, you can also choose the desired DMX Mode.
04)
Press the
SETUP
button again to choose one of the 3 different DMX Modes. Use the
UP/DOWN
buttons
to select 3, 6 or 7 channels.
Slave Mode
With this menu you can set the device as a Slave.
01)
Press the
MODE
button until the display shows
.
If the device has not been set to slave, it is automatically classified as a master device. All slave
devices will follow the master movement. If the device has been set to slave, it will react the same as
its master device.
