14
Ordercode: 42578
Powerspot 10 SW White
Main Menu Options
Auto run
Built in programs
Static Color Mode
Sound-controlled Mode
DMX address / DMX configuration
Slave mode
Settings
Info
Auto Run Mode
With this menu you can start the Auto Run program of the Powerspot 10 SW.
01)
Press the
MODE
button until the display shows
.
02)
The Powerspot will start immediately the Auto Run program.
Built-in Programs
With this menu you can choose a built-in program.
01)
Press the
MODE
button until the display shows
.
02)
Press the
SETUP
button to open this menu.
03)
You can use the
UP/DOWN
buttons to scroll through the 8 built-in programs.
04)
When you select menu
, you can choose between a variety of color settings. Press
SETUP
to
enter and choose one color setting with the
UP/DOWN
buttons.
05)
Press the
SETUP
button again to open the next menu. You can set the Flash frequency with the
UP/DOWN
buttons between
.
06)
Press the
MODE
button until the display shows
.
07)
Use the
UP/DOWN
buttons until the display shows
.
Use the
UP/DOWN
buttons to scroll between
. In the menu
,
you can switch between the Flash frequency and the Program Running Speed by pressing the
SETUP
button.
