14
The humidifier container, though disposable can be cleaned and reused several times.
Three are included with the initial shipment of the O
2
Door.
FIGURE 3.2 - Humidifier
ALUMINUM
BRACKET
HUMIDIFIER
CONTAINER
FIGURE 3.3 - Oxygen Analyzer
ALUMINUM
BRACKET
HUMIDIFIER
ADAPTER
HUMIDIFIER
HUMIDIFIER
CONTAINER
STEP 1:
Install the humidifier container using the keyhole slots and exposed screw heads.
See FIGURE 3.2
STEP 2:
Insert the humidifier into the humidifier adapter and secure with the retaining
screw. Slide the humidifier/adapter into the aluminum bracket. Add ice or water as
required to adjust the temperature of the humidifier water. See FIGURE 3.3
Refer to the manufacturer's operation, Safety warnings and maintenance procedures.
Oxygen Analyzer
The oxygen analyzer is an optional component for the O
2
Door, sold separately. The
oxygen analyzer can be used to spot check oxygen concentration within the O
2
therapy
treatment cage.
Refer to the manufacturer's operation, calibration and maintenance procedures
for instruction.
STEP 1:
Install the O
2
Analyzer by removing the plug assembly with a Phillips head
screwdriver. Clean and store the plug for replacement into the door when the
analyzer is not used. See FIGURE 3.4
STEP 2:
Insert the analyzer through the hole and secure with the cover, thread onto the
analyzer, hand tighten. See FIGURE 3.5
FIGURE 3.4 -
O
2
Analyzer Plug Removal
REMOVE
PLUG
ASSEMBLY
FIGURE 3.5 -
O
2
Analyzer Installation
O2 ANALYZER
COVER
O2 ANALYZER
Remove the O
2
Analyzer before cleaning the door. Avoid using cleaning chemicals
around the exposed end of the O
2
Analyzer.
Refer to the manufacturer's operation, safety warnings and maintenance procedures.
SECTION THREE