9
SECTION TWO
STEP 1:
Open or remove both doors if not already done so.
The latch bar has keyed (hole with a smaller slot) top holes. And the bottom of the
latch bar uses open end slots, enabling the bar to be slid out from behind the latch bar
retaining pins. See FIGURE 2.6
FIGURE 2.6 - Standard Double Door Latch Bar
CENTER LATCH BAR
KEYHOLE SLOT
OPEN END
SLOT
STEP 2:
Lift the latch bar upward to clear the keyhole slots located at the top of the latch
bar. See FIGURE 2.7
FIGURE 2.7 - Latch Top Keyhole Slot
SLIDE UP
FIGURE 2.8 - Remove Latch Top
REMOVE FROM
LATCH PINS
STEP 3:
Once clear of the keyhole slot, pull the top of the latch bar clear of the latch upper
pins. See FIGURE 2.8
STEP 4:
Lift the latch bar upward to clear the
latch pins located at the bottom. The
bottom of the latch bar has open end
slots at the end of the bar to easily slide
out from behind the latch lower pins.
See FIGURE 2.9
FIGURE 2.9 - Remove Latch Bottom
SLIDE OUT
