SHOR-LINE Oxygen Therapy Plus Door, Assembly Manual

Page: 19 / 26

16
Shor-Line.com
SECTION THREE
STEP 2:
Remove the hinge assemblies from the left side of the cage frame by removing
the screws. See FIGURE 3.9
STEP 3: Remove the latch assembly from the right side of the cage fame by removing the
screws. See FIGURE 3.10
FIGURE 3.9 - Hinge Assembly Removal
REMOVE
HINGES
FIGURE 3.10 - Latch Assembly Removal
REMOVE
LATCH
STEP 4: Flip, rotate the latch assembly so the latch bar is on the inside of the cage frame
and that both latch guides are in the top position. See FIGURE 3.11
The latch is designed for left or right operation. Hold the latch guides while sliding the
latch bar down to the lowest position on both guides.
STEP 5:
Install the latch assembly to the cage frame, tighten screws to secure the latch to
the frame. See FIGURE 3.12
FIGURE 3.11 - Latch Assembly Rotate
RIGHT
SIDE
LATCH LEFT
SIDE
LATCH
SLIDE
GUIDE
UP
SLIDE
GUIDE
UP
ROTATE
LATCH
180°
FIGURE 3.12 - Latch Assembly Installation
TOP TWO
HOLES
BOTTOM
TWO HOLES
LATCH
SCREWS
STEP 6:
Flip, rotate the hinge assembly to the right side of the cage frame so that the
hinge bushing guide is located on the inside of the cage frame. See FIGURE 3.13
STEP 7:
Install the hinge assemblies to the cage frame, tighten screws to secure the
hinges to the frame. See FIGURE 3.14
FIGURE 3.13 - Hinge Assembly Rotate
HINGE
GUIDE
SLOT
HINGE
GUIDE
SLOT
INSIDE
OF CAGE
OUTSIDE
OF CAGE
FIGURE 3.14- Hinge Assembly Installation
HINGE
SCREWS