12
STEP 6:
The double door conversion kit includes a
latch bar equipped with jamb seals. Follow
the latch bar removal procedures (reverse
order) to install the new latch bar assembly.
See FIGURE 2.19
Ensure the slots in the end of the latch bar are
located on the bottom of the cage.
STEP 7:
Install the O
2
Door by holding the door hinge
pins/bushings above the cage hinges at a
90° angle to the face of the cage. Slide the
hinge pins/bushings down into the hinges.
See FIGURE 2.20
The hinge bushings have a flat side that slide through the opening in the hinge
assembly. The flat side of the bushings must be facing away from the cage to align with
the hinges. The hinge bushing must fully seat into the hinge for proper operation.
STEP 8:
Repeat STEP 7 to install the conversion door on the right-hand side of the cage.
See FIGURE 2.21
FIGURE 2.20 - Door Installation
FIGURE 2.21 - Door Installation
STEP 9:
Close the doors, check latch operation and adjust alignment to ensure the O
2
Doors latch correctly.
FIGURE 2.22 - 48" Wide Oxygen Therapy Plus Configuration (Options Vary)
FIGURE 2.19 - Latch Bar Installation
SECTION TWO
