{8}
;
{Installing Warming Pad Controller}
ImpOrTaNT:
Do not plug power cord into outlet until cables have been connected and controller has been mounted.
To establish communication between the Warming Pad and the controller, proper cable connection is a must. Each
time the Warming Pad is moved, either to a different cage or to a table, the cable will need to be disconnected and
reconnected.
NOTICE:
Improper cable connections can cause product malfunction. Failure to follow proper connection procedures
may result in a void of all Shor-Line warranties.
{Cable Connection}
ImpOrTaNT: Do not bend the pins in the
connector.
This will cause the product to
malfunction.
The Warming Pad is connected to the controller
using a steel armored cable with straight
multi-pin connectors and a bulkhead multi-
pin connector.
The cable contains industry
standard alignment tools (Key and Key Way) to
assist you.
Once the Warming Pad cable has been
inserted through rods in the cage door, the
following steps should be taken to connect the
cable to the bulkhead connector
on the controller.
Step 1
Line up the Key and the Key Way.
NOTICE:
If Key and Key Way are not aligned,
the pins may bend, making the unit inoperable.
Step 2
Gently push the two ends together.
NOTE:
Do not force connection. If connectors
are aligned, cable will slip into place.
Step 3
Turn the nut clockwise to secure the connec-
tion.
NOTE:
Do not secure until cable is in place, as
this could damage pins.
Fig. 3.3
CONTROLLER
POWER CORD
BULK HEAD
CONNECTOR
MOUNTING BRACKET
(BACK SIDE VIEW)
Fig. 3.4
CONTROLLER
POWER CORD
BULK HEAD
CONNECTOR
MOUNTING BRACKET
(BACK SIDE VIEW)
