{10}
;
Step 4
For best results, install controller on the top rod on the right side of
the cage door. Placement here will allow the door to be opened and
closed without binding cable. See Fig. 3.6.
Step 5
Once controller has been mounted, plug power cord directly into
an outlet.
See Section 2: General Safety Precautions for Grounding
Instructions and Installation.
Your Warming Pad is now ready to use. See Section 4: Functions
for operating instructions.
{Moving Warming Pad}
The Warming Pad can be moved from one cage to another or dismantled for any reason using the following steps.
Step 1
Ensure the Warming Pad is powered off.
Step 2
Unplug power cord from outlet.
Step 3
Remove controller for cage door.
Step 4
Disconnect cable attached to the bulk head connector by turning counterclockwise.
NOTE:
It is not necessary to remove controller or cable when opening and closing cage door to monitor patient.
Step 5
Remove Warming Pad from the cage by feeding the cable back through the rods at the bottom of the cage door.
NOTE:
Warming Pad should be carried using the outer edges. Do not use cable.
Do not try to connect or disconnect the cable attached to the controller while the controller is
mounted to the cage.
Do not remove Warming Pad from cage or transport using the cable, as this could cause damage to
the Warming Pad.
Fig. 3.6
prOpEr mOUNTING
