Shoprider PROWLER 888WNLL, Operating Instructions Manual

Page: 10 / 28

Operating your Powerchair
WARNING: Seat adjustments must NOT be made while seated on your
Powerchair.
All other adjustments should be carried out while seated in your Powerchair.
Footrest Adjustment
Length
Pin Photo # 1 (a)
Pull out connecting pin from the hole in the
footrest slide tube.
See Photo # 1 (a) .
Slide out the footrest tube and refit the connecting
pin making sure the pin protrudes through the
bottom side of the tube and is secure in the
appropriate hole when the required length is
reached. Four positions possible.
Height
Pull out the connecting pin located at the back of
the footrest slide tube and position the footrest at
the required height. Five heights available. Refit
the connecting pin in the appropriate hole and
make sure the connecting pin protrudes through
the other side of the tube and is secure.
See
Photo # 1 (b) .
Pin
Photo # 1 (b)
Armrest Adjustment
Angle
Pull up on ends of armrests, which will flip back to allow easy transfer in and out of
your seat. Under your armrests you will find a bolt and lock nut that may be
adjusted up or down to alter the angle of your armrests. 13 mm wrench needed.
Length
Located under the armrest on the same side as the “Joystick Controller", you will
find a ‘hand knob’. Loosen the knob to reposition the “Joystick Controller” on the
bracket.
9