Shop fox W1867, Owner'S Manual

Page: 27 / 60

-25-
Model W1867/W1868/W1869 (For Machines Mfd. Since 11/18)
SE
TU
P
31.
Install magnetic switch over FIX SWITCH HERE label
(left support arm for Models W1867 and W1868, right
support arm for Model W1869), then secure with (2)
10-24 x
3
⁄
4
" Phillips head screws and (2) 10-24 hex
nuts (see
Figure.30
).
Figure.30. Installing magnetic switch on
support arm.
x 2
32.
Tuck loose wires into magnetic switch cover so none
can be crimped when cover is re-attached, and
then replace magnetic switch cover and tighten (2)
Phillips head screws loosened in
Step.30
to secure.
33.
Thread motor cord through support arm opening and
connect to matching plug from motor under impeller
housing (see
Figure.31
).
34. Install inlet adapter on dust port and secure with
10-24 x
3
⁄
8
" flange screw (see
Figure.32
).
Figure.31.
Magnetic switch attached to
support arm.
Motor
Cord
Support Arm
Opening
x 1
Inlet
Adapter
Figure.32. Inlet adapter installed on dust
port.