-19-
Model W1867/W1868/W1869 (For Machines Mfd. Since 11/18)
SE
TU
P
2.
Attach each support leg to base, as shown in
Figure.11
, and finger-tighten with (8)
5
⁄
16
"-18 x
3
⁄
4
"
button head cap screws and (8)
5
⁄
16
" fender washers.
Note:
For Models W1867 and W1868, install support
leg with FIX SWITCH HERE sticker on left side of
base. For Model W1869, install support leg with FIX
SWITCH HERE sticker on right side of base.
Figure.11.
Support legs attached to base.
x 8
3.
Attach
lock handle guide with stop plate to left side
of base stand, and finger-tighten with (2)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts (see
Figure.12
).
4.
Repeat
Step.3
to attach second lock handle guide to
right side of base.
Once. installed,. the. impeller. housing. makes. the.
machine. top. heavy.. Assistants. must. securely. hold.
the. impeller. housing. in. place. until. Steps. 5–7. are.
completed.
5.
With help of two assistants, lift impeller housing
and onto support legs and lock handle guides (see
Figure.13
).
Figure.13.
Impeller housing positioned on
support legs and lock handle guides.
Impeller
Housing
Lock
Handle
Guides
Support
Legs
6.
Secure impeller housing to support legs with (8)
5
⁄
16
"-
18 x
3
⁄
4
" button head cap screws and (8)
5
⁄
16
" fender
washers (see
Figure.14
).
7.
Secure impeller housing to lock handle guides with
(4)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts (see
Figure.14
).
8.
Fully tighten all fasteners installed in
Steps.2–4
(see
Figures.11–12
).
Figure.14.
Impeller housing attached to
support legs and lock handle guides.
x 8
x 4
Figure.12.
Lock handle guide with stop
plate attached to base.
Lock Handle
Guide w/Stop
Plate
x 2
Summary of Contents for W1867
Page 57: ...Model W1867 W1868 W1869 For Machines Mfd Since 11 18...
Page 60: ......
