-21-
Model W1867/W1868/W1869 (For Machines Mfd. Since 11/18)
SE
TU
P
12.
Place (2) hose clamps around flexible hose, then
slide hose over port on collection drum lid and
tighten clamp (see
Figure.18
).
13.
With collection drum lid mounting brackets facing
up, orient lid so dust port, flexible hose, and spring
brackets align (see
Figure.18
).
14.
Attach flexible hose to cyclone funnel and secure
with (1) hose clamp (see
Figure.18
).
15.
Connect ground wire to spring bracket stud, then
secure lid and ground wire using (4)
5
⁄
16
"-18 flange
nuts (see
Figure.18
).
16.
Attach 2" swivel casters to collection drum, as shown
in
Figure.19
, using (1)
5
⁄
16
"-18 hex nut on each.
17.
Adjust pre-installed flange nut and hex nut (see
Figure.19
) until drum rolls evenly without rocking or
wobbling, then tighten both nuts to secure caster in
place.
Figure.18.
Collection drum lid and related
components installed.
Spring
Bracket
Attach Ground
Wire Here
x 4
Cyclone
Funnel
Flexible
Hose
Collection
Drum Lid
Mounting
Bracket
Figure.19.
Cut-away illustration of 2"
swivel caster attachment to collection
drum.
Hex Nut
Pre-Installed
Flange Nut
18.
Place vacuum ring inside collection drum with
smaller side of ring facing down, as shown in
Figure.20
.
Note:
During operation, this ring and the vacuum
connection to the cyclone funnel will prevent the
collection bag from collapsing or being pulled up
into the cyclone.
Figure.20.
Inserting vacuum ring into
collection drum.
Vacuum Ring
Summary of Contents for W1867
Page 57: ...Model W1867 W1868 W1869 For Machines Mfd Since 11 18...
Page 60: ......
