-29-
M1036 Micro Mill
SE
RV
IC
E
After some period of time, the carbon brushes on the
DC motor will need to be replaced. Always replace the
brushes in pairs.
To.replace.the.motor.brushes,.do.these.steps:
1..
UNPLUG THE MICRO MILL!
2.
Remove the lower motor cover (see
Figure.32
) to
expose the motor.
3.
Unscrew the cap from the motor housing (see
Figure.
33
).
4.
Remove the spring and carbon brush, and replace
with a new spring and carbon brush.
5.
Screw the cap back into the motor housing.
Replacing.Motor.Brushes
Figure.33.
Carbon brush removal.
Carbon Brush
Cap
Figure.32.
Lower motor cover.
Figure.34.
Fuse replacement.
A fuse is located in the switch housing near the RPM dial.
To.replace.the.fuse,.do.these.steps:
1.
Loosen the fuse cap.
2.
Remove and replace the fuse from the fuse cradle
(see
Figure.34
).
3.
Replace the fuse cap.
Fuse.Replacement
