-12-
M1036 Micro Mill
SE
T
U
P
NOTICE
When.ordering.replacement.parts,.refer.
to.the.parts.list.and.diagram.in.the.back.
of.the.manual.
Figure.3.
Box 1 contents.
Figure.4.
Box 2 contents.
H
I
A
B
C
D
F
E
G
Box.1.Contents.(Figure.3).
Qty
A.
Headstock ...................................................1
B.
Collar ........................................................1
C.
Spacer .......................................................1
D..
Base with Column .........................................1
E.
Downfeed Lever Handle ..................................1
F.
Column Lock Knob .........................................1
G.
Fence ........................................................1
Box.1.Tools.and.Hardware.(Not.Shown).
Qty
•
Phillips Head Screwdriver ................................1
•
Hex Wrenches 2, 2.5, 3, 4mm .................... 1 Each
•.
Open End Wrench 5.5/7mm ............................1
•.
Chuck Removal Wedge ....................................1
•.
Round Belt ..................................................1
•
Cap Screw M5-.8 x 12 .....................................1
•.
Square Nut M5-.8 ..........................................1
Box.2.Contents.(Figure.4).
Qty
H.
Compound Slide Table ....................................1
I..
Handwheel Handles ......................................2
J.
Hardware for Mounting Table-to-Base (not shown)
•
Cap Screws M6-1 x 25 ................................4
•
T-Nuts M6-1 ............................................4
Additional.Hardware.for.Mounting.an.Optional.Vise
•
Cap Screws M6-1 x 30 .....................................2
•
T-Nuts M6-1 .................................................2
Inventory
The following is a description of the main components
shipped with the Model
M1036. Lay the components out to
inventory them.
Note:
If you can't find an item on this list, check the
mounting location on the machine or examine the
packaging materials carefully. Occasionally we pre-install
certain components for safer shipping.
