-20-
M1036 Micro Mill
O
PE
R
ATIO
NS
Quill.Feed.Control
The quill feed is controlled by the downfeed lever shown
in
Figure.15
. The handle allows the mill to operate as a
drill.
To.use.the.downfeed.lever,.do.this.step:
1.
Pull the quill downfeed lever (
Figure.15
) forward
to feed the quill down towards the workpiece.
The quill feed handle is spring loaded to assist in
returning the handle to the upmost vertical position.
Micro.Downfeed.Knob
The micro downfeed knob is used to accurately control
the quill depth (see
Figure.16
).
To. use. the. micro. downfeed. handwheel,. do. these.
steps:
1.
Push the clutch knob (
Figure.16
) in lightly and rotate
the micro downfeed knob until the clutch knob
engages the gear.
2..
Rotate the micro downfeed knob clockwise to feed
the quill down and counterclockwise to raise the
quill.
Downfeed.Controls
Figure.15.
Quill downfeed lever.
Downfeed
Lever
Figure.16.
Micro downfeed controls.
Micro Downfeed
Clutch Knob
Micro Downfeed
Knob
