Shivaki STV-24LEDGR7, Service Manual

Page: 167 / 175

shared, this adjustment for designer can use any panel of same resolution easily without compile
the SW again.
6) AUDIO CURVE SWITCH
For the OEM factory to adjust the volume curve as their request.
7) SSC
For the designer only to adjust the LVDS and DDR CLK, to make EMI can pass the verification.
8) VIF1
For the designer only to finetune some parameter when configure different tuner.
9) Software Update(USB)
Same with the item in CHANNEL page, because some OEM factory does not want this function
to be seen to the end user, ask to delete it in channel page.
10) PEQ
NO use for this chip series, it will be delete this item for this chip
11) UART DEBUG
Debug on/off for designer, default is off, when turn on, can write or read register value by debug
tool.
12) OverScan
For the OEM factory adjust the imagine valid size by theirself as what they want. And they tell the
designer the value to write it into the SW
13) BMTEST
For the designer use when one board change the DDR chip, has to do the phase test.
9. SW INFORMATION
This item records the time when the SW built.
10. HOTEL MODE
1) HOTEL MODE
Setting Hotel Mode either to Mode1 or Mode2 will activate the hotel mode function. If you set it
to Mode1, ATV and DTV manual tuning will be disabled. If you set it to Mode2, the user menu
will be totally disabled, and the MENU key will not work. In both case, other items in this page
will be valid.
2) HOTEL VOL LIMIT
Volume level be limited to fixed value, which is setted by Hotel Vol Limit.
3) HOTEL POWER ON SOURCE
Page 151 of 152