6
www.michael-pro.com
4. Final torque setting
1) Grasp handle of torque wrench and drive with steady force until a “click” is heard and/or
a light retroaction felt, the set torque has been achieved. Do not continue to drive when
wrench clicks.
2) Please note that the “click” becomes weaker with the lower torque settings.
B. Work as a cross wrench for loosening nut
1. Leverage power mode.
1) For a power mode as cross wrench which loosens nuts up to 340Nm (max. of 1/2” dr.
sockets).
Up to 340Nm
(max. of 1/2” dr. sockets)
4
4
4
2)
Warning!
DO NOT
place foot alignment onto the end of cross shaft
, the back bound may
cause injury of knee.
