5
www.michael-pro.com
INSTRUCTIONS FOR USE
A. Work with torque wrench
1. Torque wrench mode.
1) Press lock/release bottom
, slide handle shaft
to the end of cross shaft
and lock.
2) Note: The torque wrench function is only available in this mode.
3) Install proper socket onto square head
of handle shaft
.
2. Setting the torque easily.
1) Push setting/ locking knob
to “unlock”.
2) Dial setting/locking knob
until desired torque setting is displayed by cursor (red line) in
scale window
, graduations on the major scale are in 10 Newton Meter increments and
fine setting knob
is 1 Newton Meter, odd number is in the middle between two even
numbers.
3) Pull slightly then release the setting/locking knob
will lock by a spring-load automatically.
70
2
72
Nm
=
+
eg.
4 2 0
Locking knob
Unlock
Lock
3. Speed spinning mode
1) Place handle shaft
in the middle of cross shaft
to insert and nip nuts up speedily.
