4
www.michael-pro.com
GENERAL OPERATING SAFTY NOTES
!
Please note the following safety notes and instructions for use in
this manual to avoid malfunctions, damage or physical injure:
• This tool is not intended for use by individuals (including children) with limited physical,
sensorial or mental abilities or deficiencies in experience and/or persons unfamiliar with the
torque wrench unless they are supervised by a person responsible for their safety or receive
from this instruction in how the torque wrench is to be used.
• Children should be supervised to ensure that they do not play with the torque wrench.
• When using torque tools it is possible that fasteners may break or slip. Always stand with both
feet on the floor and avoid applying torque in awkward positions.
• Note! The torque wrench function is only available for right direction at longest cross bar
leverage mode shown on below.
Set torque to lowest level (70 Nm) if you are using the torque wrench as a general-purpose
driving wrench at left direction for loosening nuts.
• Warning! Do not use any improvised extension rods or universal ball joints, as these could
result in incorrect torque settings.
• Warning! Do not step down on the scale window and the handle of the cross shaft
, it may be
break and risk of injury.
• The drive part of the tool and any accessories should always be in line with the fastener.
Misalignment and uncontrolled movement will affect accuracy.
• Do not exert any pressure on the torque wrench beyond the set torque. This might lead to
damage to the wrench or the nut.
• Do not turn adjustment below lowest torque setting.
• The torque wrench was checked and calibrated with an ac/- 4% at the factory.
Recommend that your torque tool be calibrated after about 5,000 cycles or after 12 months by
educated people.
• Ensure that the torque is set at the lowest level (70 Nm) if you are not using or are storing the
torque wrench.
