manualshive.com logo in svg

Shinko CHC-S1245, Operation Manual

Share
Download
Shinko CHC-S1245 Operation Manual Download Page 28

 Chapter 2.  Installing and Set Up 

 

2-17

Connecting Power Cord

 

Connect the power cord according to the safety instructions below. 

Warning: Make sure to turn off the power of the printer before inserting the power cord. 

 

Warning: Must use the power cord attached with the printer. 

If your facility can not provide three-wire grounded power receptacles, it can 

cause the fire and electric shock in case of electric leakage. 

In case, impossible to have grounded power, please contact the dealers or 

service center. 

Warning: Make sure to insert the power cord correctly. If not, it can cause the fire or 

the printer problem. 

Warning: Do not make any damage or any modification to the power cord. Put the heavy 

items on the power cord, give a strong pull to the power cord and twist the 

power cord can cause the fire and electric shock. 

Warning: Do not insert or remove the power cord with wet hands. 

It can cause the electric leakage. 

 

 

 

 

Insert the power cord attached to the printer 

into the power connector located on the rear of 

the printer. 

Summary of Contents for CHC-S1245






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands