Shini SICC-120A-R2, Manual, Page: 24 / 44

24(44)
can not be shorter. Then enlarge the diameter of the cable.
6) The wiring connection between power and unit should be conducted
according to electrical regulations with good insulation, after the unit being
connected to the power; the terminals of the electrical components resistance
should be at least more than 3M
Ω .
7) Inorder to avoid the damage to those electrical devices such as transformer
or wiring due to short circuit, and helps to separately control the start/stop of
every compressor, every incoming cable needs to equip proper amount of
non-fuse breaker. Showed in the following photo:
8) Inorder to ensure personal safety, to avoid electric shock due to creepage the
housing of the unit needs to have a good grounding protective device to avoid
electric shock, all the work should be carried out by strictly follow the
electrical regulations.
9) Specific power supply specifications please refer to the schematic model.
Note: Make sure the power switch is off before power cable connection.
Picture 3-7: Essentials for Electric Wiring