24(33)
4.5
Function Setting: Special Process
4.5.1 Enter special process setting Mode
Enter setting mode according to the steps descripped in 6.4. Press
to choose
[F.11]; then keep holding
and then press
for about 1 sec. to enter into the
setting of [F.13]. The screen will alternately display [F.13] and the setting value
respectively for 0.8 sec.
4.5.2 Edit Parameters
Press
to increase parameter value. Hold
for about 1 second to quickly
increase value to the maximum input.
Press
to decrease parameter value. Hold
for about 1 second to quickly
decrease value to the minimum input.
Press
to confirm input setting and save input setting into the memory. It will
switch to next item. If you did not change anything, press
to enter the next
item.
Press
to cancel input values and return to the setting screen. If you did not
change anything, press
to enter into next setting item.
4.5.3 Exit
Hold
for 1 second to return to default display.
If no input for 20 seconds, it will return to default display without saving changes.
