20(33)
4. Application and Operation
4.1 Start / Stop the Machine
The start and stop of SAL-U series is controlled by start/stop switch on the control
panel.
4.2 Keypad on the Control Panel
Input values before selecting or canceling items.
Input values before selecting or saving items. It is also used to clear the alarm
when alarm occurs.
Increase value.
Decrease value.
+
Stop the machine in 3 seconds. By then, the machine stop working and
the screen doesn
’
t display. Press
to resume operation.
Notice: The machine will restart if connecting the power supply
again.
4.3 Parameters Setting
4.3.1 Enter Setting Mode of Layer One
Under normal operation, press
for about 1 second to enter [F.01] setting
screen. Then the screen will alternately display [F.01] and the setting value
respectively for 0.8 sec.
If [F.04] is set, the system will switch to [F.99]. The screen will alternately display
[F.99] and the setting value respectively for 0.8 sec. Input correct password to
enter [F.01].
4.3.2 Edit Parameters
Press
to increase parameter value. Hold
for about 1 second to quickly
increase value to the maximum input.
Press
to decrease parameter value. Hold
for about 1 second to quickly
decrease value to the minimum input.
