DTA-SDH/155
Operating Manual
Shineway Technologies, Inc.
28
4.6. Insert Alarm
For insert alarm, see Figure 4-7 as follows:
Figure 4-7 Insert Alarm
“Start time” refers to the time of system when the “Start” shortcut key is clicked on. “Duration” is
continual time keeping after “Start time”. Click on the exit button to stop.
“Insert mode”: continual.
“Insert alarm “:
Line
—
LOS, AIS.
PDH
—
LOF, RAI, CRCL, MAIS, CASL, MRAI.
SDH (default parameter)
—
EFAS, LOF, OOF, msAIS, msRDI, auAIS, hpRDI, hpPLM, hpUNEQ,
tuAIS, tuLOM, lpRFI, lpRDI, lpPLM, lpUNEQ, tuLOP, rsTIM, hpTIM, lpTIM, with a default value of
EFAS.
The “Set” shortcut key can set up all the input values or parameters. Once it is set up, “Insert
mode” changes to the current mode (insert alarm) instead of the original mode with a display on the
upper part of the screen. Then, the ”Insert” shortcut key can implement the insert. Insert alarm
function is unavailable in PDH test mode.
4.7. Pointer Adjusting Test
For pointer adjusting test, see Figure 4-8 as follows:
