13
EN
7. CLEANING
1. Wash immediately after each use to avoid pulp residue.
2. Wash and rinse the parts shown below with warm soapy water. These parts may be soaked
for easier cleaning. Use the cleaning BRUSHES to thoroughly clean all juicing parts.
3. Use a damp cloth or sponge to clean and wipe down the MAIN BODY after use, if necessary.
Never submerge or use running water over the MAIN BODY.
4. Dry all parts with a cloth to prevent water spots before putting them away for storage.
PLUNGER
JUICING ASSEMBLY
AUGER
AUGER HOUSING
CLEANING THE PRESSURE PLUG
To clean the pulp outlet of the
AUGER HOUSING, simply pull out the
PRESSURE PLUG from the bottom and
clean under running water. Then dry
and push the plug back into its slot.
Note:
Do not remove the screw that
holds the PRESSURE PLUG in place.
TIP:
Use the BRUSH WITH
PULP PICK to quickly clean
the pulp out from the
underside of the AUGER.
