8
STEP 1:
Make sure that the PRESSURE PLUG is fully
inserted into the pulp outlet on the bottom
of the AUGER HOUSING (see page 13 for
details). Place the AUGER HOUSING on top of
the MAIN BODY, making sure both the juice
and pulp outlets are fully seated.
STEP 2:
Push the AUGER firmly into the center of the
AUGER HOUSING, making sure the AUGER is
fully seated on the bottom.
BEFORE YOU BEGIN:
• Make sure the machine is not plugged in prior to assembling the machine.
• Make sure the POWER SWITCH is in the OFF position prior to assembling the machine.
• Before using the juicer for the first time, clean all parts, except for the MAIN BODY, in soapy
water. Then rinse and dry thoroughly.
WARNING:
Never immerse the MAIN BODY in water.
4. HOW TO ASSEMBLE
PRESSURE
PLUG
