Shindaiwa DGW500DM, Owner'S And Operator'S Manual

Page: 7 / 44

- 4 -
Caution: Injury
•
Use this equipment with it situated on a stable level surface so that it is prevented
from moving.
•
Do not move the equipment during operation.
•
Always be sure to turn off the switches of all devices using the equipment and
turn off the equipment breakers before starting the engine.
•
Always be sure to turn off the power switches of all devices using the equipment
when turning on the equipment breakers. Leaving on the power switch of a device
using the equipment when the equipment breakers are turned on could result in
the sudden operation of the corresponding device.
•
Do not leave on the power switch of a device using the equipment and do not
connect a device to an AC output receptacles and an AC output terminals.
•
The lifting lug is designed to be used only for lifting the equipment. Do not lift the
equipment with any heavy items (such as a trailer, gas canister and additional fuel
tank) added to the equipment.
•
Always be sure to use the lifting lug when lifting the equipment, and lift slowly and
directly straight above.
•
Wear a helmet, safety shoes, gloves and similar protective gear when performing
lifting work. Do not stand or get under the equipment while it is suspended.
•
Securely fix the equipment with rope or similar item so that it cannot move when
transporting by truck or other vehicle.
Caution: Injury to Eyes and Skin
•
Always be sure to wear arc-proof glasses, clothes that completely cover the skin
and other protective gear when welding to protect the eyes and skin from harmful
light rays generated during welding.
•
Always be sure to wear leather gloves, apron, shoe covers, arc-proof glasses
(face shield), safety shoes, hard hat and long-sleeve clothing to protect against
the scattering of weld spatter that occurs during welding.
Caution: Physical and Secondary Damage
•
Do not use the equipment for any improper applications. Improper usage can
result in an accident or malfunction.
•
Do not connect the AC power source to indoor wiring.
•
If using the equipment as a power source for medical equipment, you must check
with the medical equipment manufacturer, doctor and hospital before using the
equipment.
•
Set the frequency in accordance with the devices using the equipment.