Settings window for single mode allows additional functions such as
Tare function both for P1 and P2,
P1 and P2 hold time or dwell time
Graphing function similar to Manual Mode, where the data are separated into
cycles
Continuous Mode
Continuous mode can be used for fatigue testing of small plastic materials
It allows distance to be entered for 2 points (P1 and P2).
Directions can also be defined based on the application.
Time can be set to hold the position after the set distance is reached.
In addition to this function cycles can be entered to perform multiple cycles on
one test. Limitation on the number of cycles is based from the availability of
computer resources (RAM and disk space).
