FGS-200PV
SPECIFICATIONS
Capacity
100 kgf (200 lbs.)
Reduction Ratio
1:20
Precision Ball Screw Pitch
4mm / 1 Rotation
Stroke
400 mm (15.7 inch)
Travel Speed
0.6 mm/min (0.02 inch/min) - 400 mm/min (15.7 inch/min)
Drive Systeem
Servo Motor (Trapezoidal thread (pitch 4mm / 1 rotation)
Speed Setting
Selectable Speed Knobs (Speed A and Speed B)
Display
5 digit LED
Cycle (max)
1 - 9,999 times
Analog Signal Output
5 mV/ mm max +/- 2 V (400 mm)
Emergency Switch
Push/Twist and release emergency stop button
Operating Modes
MANU
MANUAL - Operates to selectable force limits
JOG
JOG - Operates while direction key is pressed
SING
SINGLE - Operates one cycle between upper and lower force limits
CONT
CONTINUOUS - Cycles test between upper and lower force limits.
PROG
PROGRAM - Specific Program Tests (each can store 5 programs on each type)
TOP: Top Load test with threshold option
STD: Standard test with preload option
BREAK: Break point test with force drop detection
Communication Feature
USB 1.1 communication from Test stand to PC
Force Gauge Compatibility
FGV-X and DFS models (Made after 1991)
Communication Software
Windows based program, virtual front panel compatible with Windows XP/2000
Alarm
Overload protection for test stand motor (stops motor when overload condition occurs).
Work Space
200 mm (7.87 inch) X 280 mm (11.02 inch)
Operating Temperature
0 - 45 degrees Celcius (Non-condensing)
Power Supply
120 V AC
Weight
23 Kg
