4
3.Installation
These are safety precautions regarding the installation of the kiln.
DANGER
This may cause a fire or electric shock.
Please do not twist, pull, put heavy objects on, or
plug the power cable forcibly.It may cause a fire or
electrical shock due to damage to the power cord.
A fire may result.Also,do not use a cord reel.
This may cause a fire or electric shock.
DANGER
It may cause a fire or other accidents if you do not
keep at least 50 cm or more between the top of the
kiln and ceiling and 15 cm between the side of the
kiln and wall.
Please do not put flammable materials such as
curtains, paint, etc. within 50 cm of the kiln. It may
cause a fire.
Please pay close attention to this warning since it
may cause fire, burn or serious accident if it comes
in contact with children.
It may cause a fire.Please open a
window a few centimeters to allow fresh air
into the room and use a portable fan for
additional air circulation if required.
Do not place power cord
under the bottom of the kiln or
high-temperature parts.
Set up in a location which has
enough space.
Keep the power cord free from
stress and obstructions.
Do not put flammable materials
near the kiln.
Do not connect other equipment
on same electrical outlet.
Do not use extension cords.
Set up in a location that is
properly vented.
Do not use power cord that is not
extended.
Set up in a location that is out of
reach of children.
WARNING
This may cause a fire or failure from electrical shock
or electrical leakage.
Please set in a location which is dry and not
susceptible to rain to prevent electrical shorts.
It may set off alarm or sprinkler due to the heat from
kiln.
Since this product is heavy, floor material may be damaged or kiln may fall.
Do not set in a location which is
susceptible to rain and water or an
area of high moisture.
Do not set under the fire-alarm
box or sprinkler.
Be careful of strength of the floor in set-up location.
