Operating procedure
Display panel
(1) Switch the power (breaker) on.
It is showing the kiln
temperature.
(2)
Push the “Basic program” key. A
Basic
(3)
Select the program and push the
key.
※
Please decide the temperature by the
characteristics of glaze.
(4) Push “Start” key.
ー
During firing
ー
(5)
Firing finishes when the display
shows “End”.
(6) Push “Stop” key.
(7) Switch the power (breaker) off.
13
2. Firing by “Basic programs”
※
After finishing <Hold 2>, it
moves to natural cooling.
The display panel flashes on
and off showing “End” once
the kiln temperature drops
down to 120
℃
.
The indicator lights up.
If you do not operate any
keys for 10 seconds, the
display goes back to show
the kiln temperature.
The indicator light is off.
For example
Basic
Prog.
1 Firing by “Basic programs”
Firing by controller
5
shows flashing.
Do not touch the kiln due to
high temperature.
Be sure to switch the power
(breaker) off before you
open the door.
DANGER
DANGER
△
!
△
!
Please be sure to read
『
Before Firing
』
before
firing.
P.12
