Operating procedure
Display panel
(1) Call up a “Basic program” similar with
the program which you want to make.
Choose
[
7
]
since you want to set
maximum temperature at 1240
℃
this
time and the content is similar.
(2)
Push
Display shows the temperature which is set in
at present.
(3) Input 1240
℃
which you want to set.
(4)
Push after making custom program in
order to save the setting content.
(5) Number the programs which you register
(preserve). Input any numbers (1
~
20).
(6)
Push again and secure it.
(7) Push
「
start
」
.
The indicator lights up.
Appendix
<
Example of custom program by controller
>
You can change a program into your own program using “Basic program”.You can make your
own program easily by changing the content of “Basic program” which is similar with the one
you prefer.
*When you want to set maximum temperature at 1240
℃
P.26
Basic
Prog.
→
Saving finishes when buzzer sounds.
You can save 20 variations of custom programs. Please number program. (1
~
20).
<In case of starting firing without registration 3→7>
Please use
〈
temperature chart for basic program
〉
to understand the content of a
basic program and
〈
note for custom program
〉
to save your own program.
25
shows flashing.