At front derailleur
At junction (A)
At battery mount
At rear derailleur
For front derailleur
For rear derailleur
Adapter
Adapter
Adapter
Inner cover
For battery mount
Junction (B)
For junction (A)
Inner cover
30
31
2.
Connect each electric wire to junction (B). Be sure to push them together
until they connect with a click.
1
2
3
3.
Connect the electric wires to junction (A), the front derailleur, the rear derailleur and the battery mount.
Routing junction (B) and the electric wires inside the frame
1.
Pass the electric wires for the front derailleur and the rear derailleur through the seat tube and chainstay respectively.
2.
Pass the electric wires for junction (A) and the battery mount and junction (B) through the down tube. Check that the screws of
the bottom bracket shell do not damage any of the components at this time.
3.
Set the electric wires so that only the electric wires for the front derailleur and the rear derailleur are visible inside the bottom
bracket shell, and if any extra parts such as wire holders are protruding, push them back inside the frame.
Assembly of the bottom bracket shell
1.
When installing the inner cover to the bottom bracket shell, make sure that the electric wires for the front derailleur and the
rear derailleur pass over the top of the inner cover.
2.
Install the inner cover to the bottom bracket adapter.
Note:
* If using a frame which does not have enough space between the inside of the
bottom bracket shell and the inner cover to route the electric wires use an inner
cover which is sold separately.